/

1HP KB Electronics KBAC-24D NEMA4X VFD 115/230VAC F-S-R ON/OFF SWITCH 5321

1HP KB Electronics KBAC-24D NEMA4X VFD 115/230VAC F-S-R ON/OFF SWITCH 5321

KBAC_small_gray.jpg
Picture is for reference only.

Part Number:

KB5321

Model/Spec Number:

KBAC-24D-SW BLACK

Manufacturer:

KB Electronics

Manufacturer Part Number:

5321
KB5321 KB Electronics KBAC-24D-SWT 1HP Digital Drive with F-S-R and ON/OFF switches with an Analog Interface Rugged Aluminum NEMA-4X/IP-65

Ordering Notes

⚠️ ON BACKORDER
This item is currently on backorder with the manufacturer. Please contact customer service for lead times.
MSRP: $446.00

Regular Price


USD

$

318

47

Weight:

7 lbs

Dimensions:

12 x 12 x 10 inches

HS Code:

8504.40.4000

Technical Details

Series:

KBAC

Output HP:

1

Output KW:

.75

Input Voltage:

115/230

Input Phase:

1

Output Voltage:

230

Output Phase:

3

Output Amperage:

3.6

Enclosure NEMA:

NEMA4X

Enclosure IP:

IP65

Full Feature KB 9987 loaded with Forward-Stop-Reverse & On/Off Line Switch

KBAC-24D Adjustable Frequency Drive is a variable speed control in a NEMA-4X/IP-65 washdown and watertight enclosure. GFCI compatible, It is designed to operate 208-230 Volt 3-phase AC induction motors through 3.6 Amps RMS. KBAC-24D comes with ON/OFF and Forward-Stop-Reverse Switches pre-installed. The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency and low noise.

KBAC-24D is easy to install and operate.

Tailoring to specific applications is accomplished via selectable jumpers and trimpot adjustments, which eliminate the computer-like programming required on other drives. However, for most applications no adjustments are necessary.

Main features include adjustable RMS Current Limit with I2t Motor Overload Protection. In addition, adjustable Slip Compensation provides excellent load regulation over a wide speed range.

Power Start delivers over 200% motor torque to ensure startup of high frictional loads. Electronic Inrush Current Limit (EICL ?) eliminates harmful AC line inrush current and adjustable Linear Acceleration and Deceleration make the drive suitable for soft-start applications.

The Ride Through feature provides a smooth recovery to the previous set speed during a momentary power loss and Regeneration Protection eliminates tripping due to rapid deceleration of high inertial loads.

Standard front panel features include diagnostic LEDs for Power On and Control Status, a Start/Stop Switch and a Main Speed Potentiometer.

Other features include a Barrier Terminal Block to facilitate wiring of the AC line and motor, adjustable trimpots (MAX, MIN, ACCEL, DECEL, COMP, CL, BOOST) and customer selectable jumpers (line voltage,motor horsepower, auto or manual restart modes, motor frequency, frequency multiplier, fixed or adjustable boost.

Dimensions approx. 9.53" X 5.5" X 5.9".
Agency approvals: UL, CE, CSA, C-Tick.

Ordering Notes

⚠️ ON BACKORDER
This item is currently on backorder with the manufacturer. Please contact customer service for lead times.
MSRP: $446.00

Regular Price


USD

$

318

47

Weight:

7 lbs

Dimensions:

12 x 12 x 10 inches

HS Code:

8504.40.4000