KBCC-225R KB Electronics 16 Amp SCR 230VAC 90VDC Anti-Plug Reversing Chassis Drive 9924

KBCC-225R 180VDC ARM is designed to provide anti-plug “instant” reversing, solid state dynamic braking and rapid cycling. Chassis SCR full-wave variable speed DC motor control, now with SMT construction. The controls contain a unique, super fast, Direct-Fed™ current limit circuit that helps to protect the SCR power bridge against direct shorts. The reliability of the KBCC™ is further enhanced with the use of high-surge, 25A SCRs and AC line and armature fusing. The KBCC™ is fitted with KB’s exclusive Plug-in Horsepower Resistor®. It eliminates the need for recalibrating IR Comp and Current Limit when the control is used on various horsepower motors.

KBCC Series combines all of the features of the KBCC™ control with the features of the KB APRM®. The APRM® eliminates contact arcing by allowing armature switching to take place only when current levels are near zero. Specific functions that can be performed by the KBCC™-R are Run-Brake, Forward-Brake-Reverse, Run-Stop and Forward-Reverse (instant reverse). The controls are ruggedly constructed and contain a remote 5K speed pot.

FEATURES:

• Plug-in Horsepower Resistor®5 – Eliminates the need to calibrate control for IR Comp and Current Limit when used on various horsepower motors.
• Tachometer or Armature Feedback
• Built-in AC Line and Armatures Fuses
• Trimpots: MIN & MAX Speed, IR Comp, Current Limit, ACCEL & DECEL
• Rugged Aluminum Heatsink
• MOV Transient Protection
• Voltage Following
• Power On and Current Limit LED Indicators
• Auto Inhibit®, Inhibit™ and Enable
• Main Speed Potentiometer (5 kΩ)
• Forward-Brake-Reverse
• Anti-plug Instant Reverse
• Run-Brake-Jog
• Auxiliary Trimpot for Speed Adjustment
• Rapid Cycling

SPECIFICATIONS: 

Speed Range (Ratio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50:1
Load Regulation – Armature Feedback
(0 – Full Load, 50:1 Speed Range) (% Base Speed) . . . . . . . . . . . . . . . . . . . 1*
Load Regulation – Tachometer Feedback
(0 – Full Load, 50:1 Speed Range) (% Set Speed) . . . . . . . . . . . . . . . . . . . . . 1*
Line Voltage Regulation (at Full Load, ± 10% Line Variation) (% Speed) 1/2*
Control Linearity (% Speed vs. Dial Rotation) . . . . . . . . . . . . . . . . . . . . . . . . . .2
CL/Torque Range (% Full Load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0 – 200
ACCEL-DECEL Time Range (0 – Full Speed) (Secs.) . . . . . . . . . . . . 0.2 – 10
MIN Speed Trimpot Range (% Full Speed) . . . . . . . . . . . . . . . . . . . . . . . .0 – 30*
MAX Speed Trimpot Range (% Full Speed) . . . . . . . . . . . . . . . . . . . . . 50 – 120*
IR Compensation Trimpot Range (at Specified Full Load) (Volts) . . . .0 – 24
Maximum Allowable Ambient Temperature (at Full Rating) (°C/°F) . . 45/113
Tach Feedback Input Volts (Per 1000 RPM) (VDC) . . . . . . . . . . . . . . . . . . .7/50

Notes: Fuses and Plugin Horsepower Resistor® supplied separately.
* Performance is for 90V PM motors on 115VAC and 180V PM motors on 230 VAC ** Based on a brake time of one (1) second. For increased operations per minute and longer brake time, consult salesperson.
CE compliance requires KBRF-200A RFI Filter and proper wiring practices.

Optional Accessories:

• KBSI-240D Signal Isolator (Part No. 9431) – Provides isolation between nonisolated signal sources and the KBMM™. Plugs onto the quick-connect terminals of the KBMM™. Contains barrier terminal block.
• RFI Filters – A variety of filters are available in both undermount and remote designs. The filters comply with CE Directive 89/336/EEC relating to the EMC Class A Industrial, Class B Residential and FCC A and B. See RFI Filters and Chokes Selection Guide D-321.