/
50FT-LB STEARNS 87300 Series IP55 230/460VAC Hazardous Location Brake with 115w Heater 1087354I0GQB
50FT-LB STEARNS 87300 Series IP55 230/460VAC Hazardous Location Brake with 115w Heater 1087354I0GQB

Product Overview
1-087-354-I0-GQB STEARNS 50FT-LB 87300 Series brakes are used in locations that are defined as normally hazardous. Hazardous-location brakes are intended essentially for non-cyclic or holding purposes, but may be used for stopping light inertial loads. The brake is listed by Underwriters Laboratories, Inc. for hazardous locations. The Class and Group designation is shown on nameplate.Part Number:
1087354I0GQBModel/Spec Number:
1-087-354-I0-GQBManufacturer:
Stearns BrakesManufacturer Part Number:
1087354I0GQBTechnical Details
Specifications
Stearns Series | 87300 |
Static Torque Lb.-ft. | 50 |
Coil Size | #6 |
Enclosure NEMA | NEMA7, NEMA9 |
Enclosure IEC | IP55 |
Hub Bore Dia. | G: 1-3/8" |
Documentation
Additional Information
Important: Please read the provided installation instructions carefully before installing, operating, or servicing your Stearns Brake. Failure to comply with these instructions could cause injury to personnel and/or damage to property if the brake is installed or operated incorrectly. For definition of limited warranty/liability, contact Rexnord Industries, LLC, Stearns Division, 5150 S. International Dr., Cudahy, Wisconsin 53110, (414) 272-1100.
Stearns Series 87,300 is a spring-set, electromagnetically released disc brake. Hazardous-location brakes are intended essentially for non-cyclic or holding purposes, but may be used for stopping light inertial loads. The brake is listed by Underwriters Laboratories, Inc. for hazardous locations. The Class and Group designation is shown on nameplate. The listing marks on the brake apply only to the brake, not to the driving equipment. In the case of a motor mounted brake neither brake nor motor are listed unless both are listed.
Features:
- Available for close coupled directly to the motor & fan guard mount
- Visual wear indicator
- Coil Insulation: Class H
- Normally open & normally closed thermostat
- Modification required for vertical mounting
- Certified USL/CNL, file E-14893
- 115w Space Heater
Caution:
- Installation and servicing must be made in compliance with all local safety codes including Occupational Safety and Health Act (OSHA). All wiring and electrical connections must comply with the National Electric Code (NEC) and local electric codes in effect. For additional information refer to the Underwriters Laboratory (UL) website at: https://www.ul.com/services/ul-and-c-ul-hazardous-areas-certification-north-america
- Do not install brake in a hazardous location other than that as designated. This brake may not be suitable for use in certain atmospheres containing explosive gases and dusts. HazLoc inspection authorities are responsible for verifying and authorizing the use of suitably designed and installed HazLoc equipment. When questions arise consult local Authority Having Jurisdiction (AHJ).
Related Items
Replacement Parts
Regular Price
USD
$
6,912
23