/
10HP MARATHON 880RPM 284T TEFC 460V 3PH XRI Blue Chip Severe Duty Motor W543A
10HP MARATHON 880RPM 284T TEFC 460V 3PH XRI Blue Chip Severe Duty Motor W543A

Product Overview
W543A MARATHON 10HP Three Phase XRI IEEE-841 Blue Chip Severe / Automotive Duty Premium Motor is designed for extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments.Part Number:
W543AModel/Spec Number:
284THFCD19102Manufacturer:
Marathon LLCManufacturer Part Number:
W543ATechnical Details
Specifications
Brand | Marathon |
Application | Severe Duty IEEE-841 |
Output HP | 10 |
Output KW | 7.5 |
Output RPM | 880 |
Frame Size NEMA | 284T |
Documentation
Additional Information
APPLICATIONS: XRI Blue Chip Severe / Automotive Duty Premium Motor is designed for extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications.
FEATURES:
- Meets or exceeds NEMA Premium® efficiencies
- Meets IEEE-841 standard for severe duty applications
- Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
- Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
- Internal and external epoxy paint
- MAX GUARD® Class F insulation system
- 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
- Precision balanced to .08”/sec
- Extended grease tubes, regreasable in service
- Brass drain and breather
- Meets General Motors GM 7E-TA Automotive Duty Specification
- Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
- Meets NEMA MG1 - 1.26.6 Waterproof specification
- Hazardous Duty™ Division 2 CSA certification nameplate
- Actual test and vibration data supplied with each motor
- Ball bearings
- UL Recognized (through 449T) and CSA Certified and CE Marked
- Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
- Addition of C-Face Kits may result in non-NEMA “BA”, dimension
- Exempt from NEMA Premium efficiency requirement
This product must be installed and serviced by a qualified technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes electrical connections, fusing or other current protection, and grounding, can reduce the chance of electrical shocks, and fires, in this product or products used with this product, such as electric motors, switches, coils, solenoids, and relays.
Related Items
Automation Products
Regular Price
USD
$
5,284
94