/

7.5HP LEESON SM2 VECTOR NEMA1 VFD 460V 3PH INPUT 174626.00

7.5HP LEESON SM2 VECTOR NEMA1 VFD 460V 3PH INPUT 174626.00

2093.JPG
Picture is for reference only.

Part Number:

174626.00

Manufacturer:

Leeson Obsolete
174626.00 LEESON 7.5HP SM2 SERIES FLUX VECTOR Drive carries all the features required by demanding applications including four modes of operation (V/Hz, Enhanced V/Hz, Vector Speed, and Torque).

Item Discontinued

Click below to view suggested functional replacement.

Weight:

8 lbs

Dimensions:

7 x 13 x 8 inches

HS Code:

8504.40.4000

UPC:

691720367698

Technical Details

Series:

SM2

Output HP:

7.5

Output KW:

5.5

Input Voltage:

400-480

Input Phase:

3

Output Voltage:

400-480

Output Phase:

3

Output Amperage:

11

Enclosure NEMA:

NEMA1

Enclosure IP:

IP31

The SM2 SERIES FLUX VECTOR carries all the features required by demanding applications including four modes of operation (V/Hz, Enhanced V/Hz, Vector Speed, and Torque), High starting torque, auto-tuning, advanced low-speed control, and dynamic speed regulation. Enclosure: NEMA1, IP21, -10 to 55*C, 2.5% derate per *C above 40*C Standard Features: Easy Set-up and Operation: Program the Vector control in one of four convenient ways: From the front of the drive The optional remote keypad A PC Using TechLink Software The innovative EPM Programmer. Modes of operation: Open Loop Flux Vector (Speed or Torque) V/Hz (constant or variable) Enhanced V/Hz with Auto-tuning Easy to Use Keypad & Display 6-Button Interface: Start Stop Forward/Reverse Scroll Up Scroll Down Enter/Mode Vivid Illumination: 4 digit LED display Easy to read from a distance Movable Decimal Point Acceleration/Deceleration Profiles: Two Independent Accel Ramps Two Independent Decel Ramps Linear or S-Type Auxiliary Ramp-to-Stop Output Frequency: 500 Hz Std., 1000 Hz Optional Selectable Logic Assertion: Positive Logic Input (PNP current sourcing) Negative Logic Input (NPN current sinking) Multiple Braking Functions Loss of Follower Management Speed Commands: Keypad, Jog, Floating Point Control Voltage: Scalable 0-10 VDC Current: Scalable 4-20mA, Potentiometer, 8 Preset Speeds Process Control: PID Modes: Direct or Reverse Acting, PID Sleep Mode Voltage Monitoring Current Monitoring Real Time Monitoring: 8 register fault history, Software Version Drive Network ID, DC Bus Voltage (V), Motor Voltage (V), Output Current (%) Motor Current (A), Motor Torque (%), Power (kW) Energy Consumption (kWh), Heasink Temperature (*C), 0-10 VDC Input (User Defined, 4-20 mA Input (User Defined) PID Feedback (User Defined), Analog Output (% Load, % Torque, kW), Network Speed (baud rate), Terminal Continuity, Keypad Status, Elapse Run Time (hours), Elapsed Power on Time (hours) Standards: UL (USA) cUL (Canada) CE (Europe) GOST (Russia/Ukraine) C-Tick (Australia/New Zealand) Dimensions H x W x D (inches) 9.83 x 5.12 x 6.3

Item Discontinued

Click below to view suggested functional replacement.

Weight:

8 lbs

Dimensions:

7 x 13 x 8 inches

HS Code:

8504.40.4000

UPC:

691720367698