KBDF MODBUS DIDF RTU COMMUNICATION MODULE 9647

KBDF MODBUS RTU COMMUNCIATION MODULE DIDF is used on the KBDF Series Drives for direct communication between the drive and a Mod bus RTU device, using RS-232 or RS-485, with the RJ-45 Jack.

1. Each of the 7 Mult1-Funct10n Inputs can be programmed for any of the respective function codes ("o.o oo "· - "0 015 ")
2. Preset Frequencies 1 - 7 are obtained by selecting a specific combination of 3 Multi-Function Input Terminals. The specific frequencies are programmed in Functions 7.07- 7.13.
3. The rate of change of the "UP" Control for frequency setting, using external contacts, is proportional to the Accel Time setting (Function 3. 03). The incremental rate of change of the "DOWN" Control for frequency setting, using external contacts, is proportional to the Decel Time Setting (Function 3.04).
4. IODF Option Board required. *Functions which can only be changed while the drive is in the Stop Mode

This product must be installed and serviced by a qualified technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes electrical connections, fusing or other current protection, and grounding, can reduce the chance of electrical shocks, and fires, in this product or products used with this product, such as electric motors, switches, coils, solenoids, and relays. Do not use this drive in an explosion-proof application.