W70 BALDOR 7" WIRE BRUSH WHEEL

APPLICATIONS: Wire Brush Wheel used for buffing.

FEATURES:

• 7" Wire wheel brush
• Wheels are crimped, carbon steel wire.

NOTE 1: Baldor 6”, 7” & 8” grinders equipped with grinding wheels can be converted to have wire brush
wheels. To properly fit the wire brush wheels, flat washers or spacer must be placed on both sides of the
wheel flanges. This will accommodate the width differences between the wire brush wheel and the original
grinding wheel. Order washers/spacers as follows: 6” (3) HW1000A50, 7” (2) HA2047A01, 8”(4) HW1000A75

NOTE 2: When installing new wheels, check wheel for possible damage. Do not use a damaged wheel. With new wheel installed and all safety guards in place, and operator standing away from front of grinder, run grinder for one minute before applying work.