1.5HP MARATHON 1725RPM 56HC 230/460V TEFC 3PH MOTOR G584A
|Ship Weight:||45 lbs.|
APPLICATIONS: General purpose use on gear reducers, pumps, machine tools, and other
direct-coupled equipment installed in damp, dusty, or dirty environments.
- Totally enclosed, fan cooled
- C-Face with removable base
- 5/8" output shaft diameter
- Four in One design
- Ball bearings, mechanically locked on shaft end
- Class F Insulation
- 1.15 Service Factor
- 10:1 constant speed range
- 56H, 143T, and 145T Combination Base with 12 mounting holes
- Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower
- F1 Mounting only, cannot reassemble to F2
- Accept brake kits
- UL Recognized and CSA Certified
- Two year warranty
- Footnotes: 5,6,13,68
Additional features for "Four-In-One" motors only:
- CR200 Corona resistant magnet wire
- Bolt-on, removable rigid base
- Suitable for horizontal and vertical mounting
- Will accept drip cover kits
This product must be installed and serviced by a qualified technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes electrical connections, fusing or other current protection, and grounding, can reduce the chance of electrical shocks, and fires, in this product or products used with this product, such as electric motors, switches, coils, solenoids, and relays. Do not use this product in an explosion-proof application.
|Mounting||C-Face - Removable Base||NEMA Design||B|
|Orientation||HORIZONTAL OR UP OR DOWN||Starting Type||ACROSS THE LINE|
|Assembly||F1 ONLY||KVA Code||K|
|Drive End Bearing||BALL||IP Code||43|
|Opposite End Bearing||BALL|
|Drive End Bearing Size||6203|
|Opposite End Bearing Size||6203|
|Weight||30 LB lbs|
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.