LENZE 844-240 AC TECH SCL/SCM Series Remote Keypad
LENZE 844-240 AC TECH SCL/SCM Series Remote Keypad option allows the SCL/SCM Series drive to be programmed and controlled from up to one hundred feet away. When properly mounted, the remote keypad is rated NEMA 4X.
NOTE: The SCF Remote Keypad is supplied with a cable that can only be used for distances up to 8 feet in low-noise environments. For distances up to 100 feet, or in high-noise environments, use Belden 9842, Carol C4842, or equivalent (24 gauge minimum) wire only
NOTE: The Remote Keypad option will only work with SCF drives that have parameter version “309” or “312”. It will not work with SCF drives that have the High Frequency or PI Setpoint Control options. The parameter version appears momentarily on the drive display when it is powered up, and also appears on a small label on the drive’s heatsink.
WARNING!: If OEM mode is selected (using Parameter 48), and if the OEM Default setting for Parameter 14 and/or 15 is “01”, the remote keypad will be disabled, and the STOP key WILL NOT work. Refer to the SCF Installation and Operation Manual for information on OEM Default settings.
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.