1/15HP LEESON 9RPM 115VAC 1PH PARALLEL GEARMOTOR M1125127
LEESON M1125127 1/15HP SUB-FHP AC Single phase gearmotor, totally enclosed for continuous duty, general purpose applications. Permanent split capacitor motors rated 115/230 VAC, 60/50 hertz input, and have starting torque equal to the running torque.
Design Specifications: LEESON Parallel Shaft PZ Series incline gearing is of precision machined steel, with first stage steel helical gear followed by spur type gears. Lubrication is by semi-fluid grease, reducing possibility of leakage and providing permanent lubrication. Output shafts have needled bearings for high load capacities. Shafts are hardened steel
Application Notes: All PZ Series gearmotors are supplied with continuous duty “run” capacitor. Conduit box is optional and NOT supplied with motor.
These gearmotors are designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the motor’s shaft seal fail. If these gearmotors are stalled, gearhead damage may result, especially in the ratios of 60:1 and higher. Provisions to limit the torque are recommended. Full load torque values for reasonable gear life. Overhung load capacities shown are at the center of output shaft. Model PZ gearmotors have the same mounting dimensions as Bodine model D and Z gearmotors
|HPKW||.06||F.L. Amps||F.L. Amps||.9|
|Frame||31||S. F Amps||S. F Amps|
|Torque Lb-In||100||Serv. Factor||1.0||PF|
|Eff 100%||Eff 75%||Enclosure||TEFC|
|Series||PZ||Overrlung Ld.||155||Shaft Type||PARALLEL|
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.