This LEESON Motor Can Ship Ground Freight ONLY!

For expedited needs please contact our sales team for freight options.

LEESON IEC Metric-dimensioned AC motors meeting North American performance standards, including 1.15 service factor and EPACT efficiencies. Motors have both B5 flange mounting and B3 baseCast Iron Frame

• Cast Iron Frame
• Premium efficiency
• Drain Hole locations in four quadrants can be drilled-out for multi-position condensate drainage.
• D flange (B5) and C face (B3) mounting
• “Captive Shaft” keyway.
• Drilled and tapped shaft.
• Oil Seals on both the drive end and non drive end.
• High efficiency design utilizes low-loss steel laminations for optimum power and performance.
• Class F insulation system with Class B temperature rise or lower.
• Aluminum “full fact” nameplate with information on motor efficiency and power factor. Stamped
  with 60Hz and 50Hz data.
• Multi-mount repositionable feet allow for three conduit box positions (F2, F1, F3)
• External grounding provision.
• Special design steel fan cover and low-noise fan maximize airflow efficiency.
• Conduit Box with neoprene gaskets. Reposition metric “PG” tapped lead exit hole by rotating box
  in 90 degree increments. Move box to F1 or F2 position by relocating motor feet.
• Terminal Boards included. 230/460V motors have 9 leads.
• CSA: File number LR33543
  UL: File number E57948 for motors produced January 2004 and later
• IP55 weatherproof enclosure allows for use in wide range application.