Need Help? Call (302) 653-1844

Home > Motor Controls > DC Motor Drives > KB Electronics DC Drives > KB Electronics DC Chassis Drives > KBCC-125R 9937 SCR Chassis 115VAC 90VDC REVERSING

KBCC-125R 9937 SCR Chassis 115VAC 90VDC REVERSING

KBCC-125R 9937 Reversing Chassis Control - In Stock
KBCC rated at 115VAC, 1/50 thru 1.5HP, 90VDC ARM is designed to provide anti-plug “instant” reversing, solid state dynamic braking and rapid cycling. It combines all of the features of the KBCC™ control with the features of the KB APRM®. The APRM® eliminates contact arcing by allowing armature switching to take place only when current levels are near zero. Specific functions that can be performed by the KBCC™-R are Run-Brake, Forward-Brake-Reverse, Run-Stop and Forward-Reverse (instant reverse). The controls are ruggedly constructed and contain a remote 5K speed pot.

KBCC-125R KBCC Series of chassis SCR full-wave variable speed DC motor control, now with SMT construction. The controls contain a unique, super fast, Direct-Fed™ current limit circuit that helps to protect the SCR power bridge against direct shorts. The reliability of the KBCC™ is further enhanced with the use of high-surge, 25A SCRs and AC line and armature fusing. The KBCC™ is fitted with KB’s exclusive Plug-in Horsepower Resistor®. It eliminates the need for recalibrating IR Comp and Current Limit when the control is used on various horsepower motors.

FEATURES:

  • Plug-in Horsepower Resistor®5 – Eliminates the need to calibrate control for IR Comp and Current Limit when used on various horsepower motors.
  • Tachometer or Armature Feedback
  • Built-in AC Line and Armatures Fuses
  • Trimpots: MIN & MAX Speed, IR Comp, Current Limit, ACCEL & DECEL
  • Rugged Aluminum Heatsink
  • MOV Transient Protection
  • Voltage Following
  • Power On and Current Limit LED Indicators
  • Auto Inhibit®, Inhibit™ and Enable
  • Main Speed Potentiometer (5 kΩ)
  • Forward-Brake-Reverse
  • Anti-plug Instant Reverse
  • Run-Brake-Jog
  • Auxiliary Trimpot for Speed Adjustment
  • Rapid Cycling
Dimensions: 9.0” x 6.25” x 4.50”.

SPECIFICATIONS:

Speed Range (Ratio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50:1
Load Regulation – Armature Feedback
(0 – Full Load, 50:1 Speed Range) (% Base Speed) . . . . . . . . . . . . . . . . . . . 1*
Load Regulation – Tachometer Feedback
(0 – Full Load, 50:1 Speed Range) (% Set Speed) . . . . . . . . . . . . . . . . . . . . . 1*
Line Voltage Regulation (at Full Load, ± 10% Line Variation) (% Speed) 1/2*
Control Linearity (% Speed vs. Dial Rotation) . . . . . . . . . . . . . . . . . . . . . . . . . .2
CL/Torque Range (% Full Load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0 – 200
ACCEL-DECEL Time Range (0 – Full Speed) (Secs.) . . . . . . . . . . . . 0.2 – 10
MIN Speed Trimpot Range (% Full Speed) . . . . . . . . . . . . . . . . . . . . . . . .0 – 30*
MAX Speed Trimpot Range (% Full Speed) . . . . . . . . . . . . . . . . . . . . . 50 – 120*
IR Compensation Trimpot Range (at Specified Full Load) (Volts) . . . .0 – 24
Maximum Allowable Ambient Temperature (at Full Rating) (°C/°F) . . 45/113
Tach Feedback Input Volts (Per 1000 RPM) (VDC) . . . . . . . . . . . . . . . . . . .7/50

Notes: Fuses and Plugin Horsepower Resistor® supplied separately.
* Performance is for 90V PM motors on 115VAC and 180V PM motors on 230 VAC ** Based on a brake time of one (1) second. For increased operations per minute and longer brake time, consult salesperson.
CE compliance requires KBRF-200A RFI Filter and proper wiring practices.

OPTIONAL ACCESSORIES

  • KBSI-240D Signal Isolator (Part No. 9431) – Provides isolation between nonisolated signal sources and the KBMM™. Plugs onto the quick-connect terminals of the KBMM™. Contains barrier terminal block.
  • RFI Filters – A variety of filters are available in both undermount and remote designs. The filters comply with CE Directive 89/336/EEC relating to the EMC Class A Industrial, Class B Residential and FCC A and B. See RFI Filters and Chokes Selection Guide D-321.
KBCC-125R 9937 SCR Chassis 115VAC 90VDC REVERSING
Click Image to Enlarge
Picture is for quick reference only
Manufacturer Part Number: KBCC-125R
Stock # KB9937
Price: $248.00
Compare At: $354.00
Quantity:

Product Reviews

There are currently no customer reviews for this product.

Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.

Write a review now

Subscribe to Our Newsletter to Receive Updates