KBIC-240D KB Electronics 12 Amp SCR 115/230VAC Chassis Drive 90/180VDC Output 9464

KBIC full-wave DC motor speed controls are designed for applications demanding excellent performance, high reliability and low cost. Max 1HP with optional heatsink installed.

KBIC Controls offer better than 2% regulation over a 50:1 speed range. These chassis drives include MOV transient protection, trimpot adjustments for MIN, MAX, ACCEL, IR, CL, and a 5k ohm potentiometer. This drive also contains Auto Inhibit® which provides a smooth, safe start during rapid switching of the AC line.

Applications:

• Conveyors
• Packaging Machines
• Feeders
• Welding Positioners
• Pumps
• Machine Tools
• Exercise Equipment
• Screening and Printing Equipment

Features:

*Auxiliary Heat Sink is required when operating motors above ½ HP at 90VDC and 1 HP at 180VDC

• Plug-in Horsepower Resistor® (see chart) allows a single model to be used on a wide range of motors
• MOV Transient Protection
• Trimpots: MIN, MAX, ACCEL, IR & CL
• Voltage Following
• Inhibit™ and Auto Inhibit®
• Dual Voltage Capable on 230V “D” and “DS” Models

SAFETY WARNING!!! This product should be installed and serviced by a qualified technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes electrical connections, fusing or other current protection, and grounding, can reduce the chance of electrical shocks, and/or fires, in this product or products used with this product, such as electric motors, switches, coils, solenoids, and/or relays. Do not use this drive in an explosion-proof application. Eye protection must be worn and insulated adjustment tools must be used when working with drive under power. This product is constructed of materials (plastics, metals, carbon, silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and filtering of this product can reduce the emission of radio frequency interference (RFI) which may adversely affect sensitive electronic equipment. It is the responsibility of the equipment manufacturer and individual installer to supply this Safety Warning to the ultimate end user of this product. 

This drive contains electronic Start/Stop circuits, which can be used to start and stop the drive. However, these circuits are never to be used as safety disconnects since they are not fail-safe. Use only the AC line for this purpose. Be sure to read and follow all instructions carefully. Fire and/or electrocution can result due to improper use of this product.

Optional Accessories:

• Auxiliary Heatsink (P/N 9861) extends rating of basic control
• Barrier Terminal Accessory Kit (P/N 9863)
• AC Line & Armature Fuse Kit (P/N 9849)
• Dial Plate & Knob Kit (P/N 9832)