KBIC-240 2HP SCR Chassis Drive 230VAC 180VDC 1-WAY 9428
KBIC-240, 9428 - In Stock
KBIC® full-wave DC motor speed controls are designed for applications demanding excellent performance, high reliability and low cost. Max 2HP with optional heatsink installed.
KBIC Controls offer better than 2% regulation over a 50:1 speed range. The controls are fabricated with components which have proven reliability, including MOV transient protection, which is used to protect the power bridge. Integrated circuitry is used to provide a non-complicated design with superior load and line voltage regulation. Electronic current limiting (CL) protects the motor and control against overloads by limiting the maximum level of output current. Acceleration start (adjustable from .5 to 4 seconds) provides a smooth start each time the AC power is applied.
- Packaging Machines
- Welding Positioners
- Machine Tools
- Exercise Equipment
- Screening and Printing Equipment
- Plug-in Horsepower Resistor® (see chart) allows a single model to be used on a wide range of motors
- MOV Transient Protection
- Trimpots: MIN, MAX, ACCEL, IR & CL
- Voltage Following
- Inhibit™ and Auto Inhibit®
- Dual Voltage Capable on 230V “D” and “DS” Models
SAFETY WARNING!!! This product should be installed and serviced by a qualified technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes electrical connections, fusing or other current protection, and grounding, can reduce the chance of electrical shocks, and/or fires, in this product or products used with this product, such as electric motors, switches, coils, solenoids, and/or relays. Do not use this drive in an explosion-proof application. Eye protection must be worn and insulated adjustment tools must be used when working with drive under power. This product is constructed of materials (plastics, metals, carbon, silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and filtering of this product can reduce the emission of radio frequency interference (RFI) which may adversely affect sensitive electronic equipment. It is the responsibility of the equipment manufacturer and individual installer to supply this Safety Warning to the ultimate end user of this product.
This drive contains electronic Start/Stop circuits, which can be used to start and stop the drive. However, these circuits are never to be used as safety disconnects since they are not fail-safe. Use only the AC line for this purpose. Be sure to read and follow all instructions carefully. Fire and/or electrocution can result due to improper use of this product.
- Auxiliary Heatsink (P/N 9861) extends rating of basic control
- Barrier Terminal Accessory Kit (P/N 9863)
- AC Line & Armature Fuse Kit (P/N 9849)
- Dial Plate & Knob Kit (P/N 9832)
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.