1/50-1/2HP KBWK-23D NEMA1 VFD 115/230VAC 1PH INPUT 8860
|Part Number:||8860 - In Stock|
|Description:||1/50-1/2HP,115/230VAC 1PH Input|
|Output:||2.4 Amps, 230VAC, 3PH|
|Ship Weight:||2 lbs.|
KBWK-23D 8860 Digital AC Drive
- Horsepower (Kw) 1/4 (.187) to 1/2 (.375)
- 1Ø Input 115/230 VAC, 50/60 Hz
- 3Ø Output 230 VAC
- On/Off AC Line Switch
- 200% Starting Torque
- Digital Interface
- Rugged NEMA-1/IP-20 Enclosure
- UL pending
WARNING! To prevent accidental contact with high voltage, it is required that the cover be properly installed onto the drive after all wiring and setup is complete. It offers protection against electric shock which limits the potential liability to the equipment manufacturer and installer.
- Motor Overload (I2t) with RMS Current Limit: Provides motor overload protection which prevents motor burnout and eliminates nuisance trips.
- UL approved as an electronic overload protector for motors.
- Electronic Inrush Current Limit (EICL™): Eliminates harmful inrush AC Line current during startup and allows rapid start with AC Line.
- Short Circuit: Shuts down the drive if a short circuit occurs at the motor (phase-tophase).
- Regeneration: Eliminates nuisance tripping due to bus overvoltage caused by rapid deceleration of high inertial loads.
- Undervoltage and Overvoltage: Shuts down the drive if the AC Line input voltage goes below or above the operating range.
- MOV Input Transient Suppression: Protects the drive components against damaging voltage spikes on the AC line.
- Microcontroller Self Monitoring and Auto-Reboot.
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.