KBPW-240D 1/50-2HP PMW NEMA4X DC DRIVE 8402
KBPW-240D 8402 WHITE FDA EPOXY PWM Control - In Stock
Rated up to 2HP with Full-Wave PWM Variable Speed Drive in a NEMA-4X / IP-65 is a 115/230VAC washdown and watertight enclosure. It is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors.
KBPW-240D PWM is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors. Motor overload protection (I x t) will shut down control if the motor is overloaded for a predetermined amount of time. The exclusive Auto-Inhibit® circuit allows safe, smooth starting during rapid cycling of the AC line. The KBPW-240D Variable Speed DC Drive can be operated from a two or three wire start/stop circuit or can be started from the AC line. A set of dedicated normally open or normally closed relay contacts are provided, which are activated via the start/stop circuit. Main features of the KBPW-240D Variable Speed DC Drive include Speed or Torque modes. Standard front panel features of the KBPW-240D include diagnostic LEDs (for Power On, Stop and Overload), a Start/Stop Switch and a Main Speed Potentiometer. Other features include Barrier Terminal Blocks, adjustable trimpots, selectable jumpers and LEDs. The KBPW-240D Variable Speed DC Drive is available in black finish or white FDA approved finish.
- Forward-Brake-Reverse Switch with hesitation feature (P/N 9339). Includes switch and prewired dynamic brake resistor.
- Run-Stop-Jog Switch (P/N 9340)
- Signal Isolator, KBSI-240D (P/N 9431)
- On/Off AC Line Switch (P/N 9341)
- Electronic Pot, KBEP-240D (P/N 9108)
- Anti Plug Reversing Module (P/N 9378)
- Auto/Manual Kit (P/N 9377)
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.